| |
 |
| |
|
|
American Made!
Solid Built
Excellent Air Flow
Superior Lighting
Easy & Economical to Operate
Priced Right
Powder Coated White
Windows in Doors
Full Paint & Curing System
Balance Control System |
This UniCure
Downdraft Comes Complete
All Galvanized Steel Construction Panels
Porcelain Like Powder Coated White Finish
All Necessary Fasteners and Sealing Materials
(2) Solid Product Doors with Windows
(1) Personnel Door with Window and Hardware
(13) 4 Tube Fluorescent Light Fixtures
(2) 24" Exhaust Fans with Motors
(2) Extra Sections of Exhaust Duct
(2) Exhaust Duct with Clean-out
(2) Automatic Exhaust Air Ventilators
All Necessary Filters
Standard Inside Height 9'-0"
Optional Inside Height 8'-0" or 10'-0"
ETL Approved Models Available
|
| |
1-800-868-3033 |
Safety Features:
Air Safety Interlock Valve
Interlock Exhaust Safety Switch
Magnehelic Gauge
|
 |
|
|
| |
|
| |
| Outside Dimensions |
|
Inside Dimensions |
| Length |
24' - 6" |
|
Height |
9' - 0" |
| Width |
16' - 4" |
|
Door Height |
8' - 10" |
| Height |
11' - 3" |
|
Door Width |
8' - 8" |
|
| |
| |
| Additional Information |
| |
- The spraybooth construction and exhaust
air flow velocities are designed to meet or exceed OSHA
standards.
- Standard safety equipment includes interlock
exhaust air saftey switch and a compressed air safety valve
for air interlock control.
- This booth is constructed of 18 gauge galvanized
sheet steel, with interlocking flange edges that are fastened
together with self-tapping speed screws. Panels have exterior
flanges to provide a smooth interior surface.
- The doors are built with two inch by two
inch square tube frames for heavy duty service, and have
a lip air seal. One 36" × 84" personnel access door
is standard. The door can be located on either side to meet
user requirements.
- Standard exhaust system is funished with
fans and open type motor.
- Exhaust units and motors supplied are based
on the booth installed with a maximum of 25' straight exhaust
ducting. When additional ducting or elbows are used, a higher
output fan and larger motor might be required. If so, consult
your factory representative.
- Dry filter booths are furnished with one
set of pre-filters, ceiling filters and exhaust filters.
The filters have a Class II listing by Underwriters Laboratories,
and are Factory Mutual approved.
- Magnehelic gauge is funished to indicate
when the intake and exhaust filters need changing.
- All light fixtures are 48" fluorescent
4 tube, 110 volt, 40 watt, UL approved, Class I, Division
II. Optional light fixtures are available to meet Class
I, Division II, and Class I, Division I hazardous area requirements.
Light tubes are furnished with the fixtures.
- Booth requires electrical connections to
the fan and light fixtures, and also mechanical duct system
connections for air discharge to the outside, and hardware
for anchoring the booth to the floor. Motor starters and
start/stop stations are included as standard equipment.
- Caulking, seals, fasteners, and all necessary
hardware for the complete mechanical installation are furnished
with all units.
- Specifications subject to change without
notice.
|
|
|
| |
|
|
© Copyright 2007-2008 UniCure Spraybooths - All Rights Reserved. |
Website Designed and Hosted By
|
|
